If you feel uncertain about taking this mechanism apart or need genuine manufacturer's replacement parts, give T & L Laundry Equipment a call. Affordable Commercial Washer in Charleston, SC The good news is that since you know how to remove it, you can replace it. If the problem continues, the mechanism may need to be replaced. It is important to note the placement of any nuts, screws, connections, or other parts as you disassemble the coin slide. Once you have cleared the slot, test the mechanism with a fresh coin before you reassemble the mechanism. The offending coin or debris should be able to be clearly seen at this point.

Disconnect any wiring from the slot mechanism and carefully free the mechanism from the housing.

Remove the long bolt that runs from the maintenance panel to the front of the housing.

The panel is usually locked in the back with a key.

Take off the maintenance panel on the top face of the coin slide housing.

Check to see if anything is blocking the coin shoot inside.

Remove the coin store tray and empty it.

If the coin slide, rather than the coin, is the issue you may need to disassemble the coin acceptor.

Attempt to pull the coin out of the slot with tweezers.

Using a utility knife to push the coin upright may allow it to pass through normally.

If the coin has tipped inside the coin slot, the coin slot may not move.

Use caution not to hammer so hard that you cause damage to the machine.

Place a piece of wood or something to protect the finish of the machine and tap on the wood with a hammer to unjam the coin.

Slap the side of the machine where the coin slot is located to get the coin to move.

Put another coin into the slot and attempt to use this action to dislodge the stuck coin.

However, when that doesn't do the trick, there are a few tried and true things you can try to get that coin to move before you take the assembly apart. Ideally, a stuck coin should dislodge from the chute with a press of the coin return button.

If you need a new or used vended dryer or vended commercial washer in Charleston, SC, make the call to T & L Laundry Equipment for big savings. Whether the cause of the jam is a damaged coin or a worn out slide mechanism, remedying the problem can be easy if you know how to take the machine apart to get to the stuck coin. As a laundromat owner you know there is nothing more frustrating than having a coin jammed in one of your machines.

Coins stuck in washing machine slot